IntraOs 70 is a traditional dental X-ray equipment designed to face the most demanding needs of the dental profession both when using traditional films and digital imaging receptor. Main feature of system is the great energy offering obtained by combining the voltage potential of 70 kVp and the anodic current of 7 mA with a wide range of exposure times, from 60 ms to 3.2 s.

FDA AND UL APPROVED!

The possible selections of technical parameters satisfy all the needs of both dental offices using traditional films with chemical processing as well as those equipped with low-radiation-dose digital sensors.

The small focal spot, the beam limiting device with effective near focus collimation, and the penetration power of a 70 kVp radiation beam make the best combination of which grant sharp images with good radiographic contrast for optimal detail perception.

Depending on selected configuration, features such as grid control action and compensation of mains fluctuations assure consistent film blackening in a wide range of operating conditions, thus granting high diagnostic quality at first time (less retakes). Available configurations include wall or unit mounted solutions and mobile.

Wall mounted system feature short, medium, or long extension arms giving a useful reach up to 185 cm when combined with the folding arm, and up to 137 cm when equipped with the simple one. The mobile version comes with a simple arm and a short extension 40 cm long.

The systems can come with the AutoSet timer thus offering the best flexibility of use. Common functionality include a green light for ?system ready?, a yellow light and a buzzer for ?radiation emission?, and a red light for ?faulty condition?; each timer and each hand-switch can be remotely mounted.

	Round beam limiting device, 20 cm (8?) focus-film distance, 6 cm (2,36?) output field diameter.  Rectangular beam limiting device as an option to reduce patient?s exposure to radiation.
Choice among two timers, microprocessor controlled: AutoSet and TS16.

AutoSet is a digital timer object oriented, with automatic exposure setting. Once tooth type and patient size have been input, time values appear on the digital display. It also controls dose reduction when using digital receptors.
TS16 is the standard model with manual setting of exposure times from 100 ms to 3.2 s. On this protection against tube over-heating is based on duty cycle.