SMITECH (Asia) Pte Ltd

	Products

		Scientific / Teaching Equipment
		Healthcare Equipment
		Medical Hospital Equipment
		Diagnostic Imaging System (Medical)
		Diagnostic Imaging Systems (Dental)
		Industrial / Laboratory Equipment
		Technical Services / Training

Soredex Cranex D Ceph

X-ray generator

TUBE

- OPX/105, or equivalent

FOCAL SPOT

- 0.5 mm IEC 336

TARGET ANGLE

- 5º

TARGET MATERIAL

- Tungsten

OPERATING TUBE POTENTIAL

- Panoramic imaging 57 - 85 kV (±4 kV)

- Cephalometric imaging 60-85 kV (±4 kV)

OPERATING TUBE CURRENT

- 10 mA (±1 mA) at 0.5 FS

MAXIMUM TUBE CURRENT

- 11 mA

MAXIMUM OUTPUT POWER

- 945 W nominal

FILTRATION

- minimum filtration 2.7 mm Al

BEAM QUALITY

- HVL over 2.5 mm Al @ 85 kV

OUTER SHELL TEMPERATURE

- +50ºC (122ºF) maximum

DUTY CYCLE

- controlled by the software of the unit

Power requirements

INPUT VOLTAGE

- 230 or 115 VAC (±10%), 50/60 Hz, single phase, grounded socket

MAXIMUM LINE CURRENT

- 7 A (@85 kV/10mA, 230 VAC mains)

MAXIMUM LINE RESISTANCE

- 1 ohm

MAXIMUM LINE FUSING

- 10 A /20A slow @ 230/115 VAC (main fuse 8A/16A slow in the device)

LINE SAFETY SWITCH (when required)

- Approved type, min. 10 A 250 VAC

EARTH LEAKAGE CIRCUIT BREAKER (when required)

- Approved type, min. 16 A 250 VAC, breaker activation leakage current

accordance with local regulations.

Mechanical parameters

PANORAMIC

- Source to Image layer Distance (SID) 520 mm (±10 mm)

- Magnification factor 1.34

CEPHALOMETRIC

- Source to Image layer Distance (SID) 1721 mm ±20 mm

- Source to Object Distance (SOD) 1500mm

-Magnification factor 1.15

WEIGHT

- Panoramic unit 120 kg

- Panoramic/cepahlometric unit 165 kg

DIMENSIONS

- Panoramic unit (H x W x D) 2320 x 1200 x 1000 mm

- Panoramic/cephalometric unit (H x W x D) 2320 x 1200 x 1900 mm

VERTICAL HEIGHT OF CHIN REST

- 950 - 1750 mm (+- 10 mm)

Digital image receptor
Only the CCD sensors specifically designed for Cranex D unit can be used.
PIXEL SIZE
- 96 micrometres
Timer
PANORAMIC EXPOSURE TIMES
- Normal 17.6 s (±15%)
- Child 16 s (±15%)
- Partial 1.9 s - 3 s - 9.2 s - 3 s - 1.9 s
Can be freely selected and combined, overlapping approx. 0.3 s.
- TMJ 3.3 + 3.3 s (±15%)
Max 240 mAs
CEPHALOMETRIC EXPOSURE TIMES
- 8 - 20 s scanning times, 5 steps according to R’10 series (ISO)
BACK-UP TIMER
- 23.5 s (±1.5s)
Leakage technique factors
PANORAMIC
- 85 kV, 2400 mAs/h (85 kV, 10 mA, duty cycle 1:15)
CEPHALOMETRIC
- 85 kV, 1800 mAs/h (85 kV, 10 mA, duty cycle 1:20)
Measurement bases
kV and mA values can be verified with a specified digital multimeter according to
separate measurement instructions. The exposure times can be measured as the
duration of radiation in the primary radiation beam.
Exposed field size in cephalometry
- 22 x 26 cm for lateral projections
- 22 x 22 cm for PA and AP projections
- Automatic filtration of soft tissues for lateral projections controlled by software.
Operating ambient conditions
- Operating temperature 10 - 40ºC
- Relative humidity 0 - 85 RH%
Storage ambient conditions
- Storage temperature 0 - 40ºC
- Relative humidity 0 - 85 RH%
Minimum computer requirements
The values in (brackets) are recommended values.
OPERATING SYSTEM
- Windows XP Professional / Home / SP1 or SP2
- Windows 2000 Professional / SP4
CPU
- Pentium 4 or Athlon XP or equivalent (1.5 GHz or better recommended)
RAM
- 256 MB (512 MB recommended)
HDD
- 20 GB (single user)
VIDEO RAM
- 16 MB (or more)
NETWORK CONNECTION
- 10/100 Mbit/s Ethernet NIC
DISPLAY
- 1280 x 1024 x 24-bit Tru Color, 85Hz display
(19" CRT or 17” TFT LCD recommended)
COM 1 and COM 2 available (free)
Connection to the PC must meet EN60601-1 requirements.
The use of ACCESSORY equipment not complying with the equivalent safety requirements
of this equipment may lead to a reduced level of safety of the resulting
system. Consideration relating to the choice shall include:
- use of the accessory in the PATIENT VICINITY
- evidence that the safety certification of the ACCESSORY has been performed in
accordance to the appropriate IEC 601-1 and/or IEC 601-1-1 harmonized national
standard
- only RS 232C interface cable and fibre cable, provided by the manufacturer, shall
be used.